Two Pump DOL Starter
Features :
- Controls two pumps in automatic operation
- Automatic motor ON/OFF based on water level
- Supports cascading operation of Pump 1 and Pump 2
- Delay OFF and cyclic timer
- Dry reset timer
- Auto/manual operating modes
- Protects motors and pumps from excessive usage
- Intelligent water-level monitoring
Technical Details :
The Two Pump DOL Starter is a dual-motor control panel designed to operate two pumps through a single automated system. It monitors water levels and manages pump operation as required, while providing motor protection and cascading control for reliable water management.
Models
| Model | Load Capacity |
|---|---|
| DOL 96 18 2 PUMP | Up to 5 HP |
| DOL 96 25 2 PUMP | Up to 7.5 HP |
| DOL 96 32 2 PUMP | Up to 10 HP |
| DOL 96 40 2 PUMP | Up to 20 HP |
Protection
| Protection | Details |
|---|---|
| Overload | Over Current Protection |
| SPP | SPP Protection |
| Dry Run | Under Current Protection |
| Phase Protection | Phase Loss & Phase Sequence |
| Voltage Protection | High & Low Voltage |
| Short Circuit | Short Circuit Protection |
Specifications
| Parameter | Details |
|---|---|
| Starter Type | Three Phase Electronic DOL Starter |
| Pump Capacity | Two Pumps |
| Operation | Auto / Manual Mode |
| Timer | Delay OFF & Cyclic Timer |
| Reset | Dry Reset Timer |
| Water Level Control | Automatic Water Level Monitoring |
| Pump Control | Pump 1 & Pump 2 Cascading |
| Display | Intelligent Digital Meter |
| Application | Dual Pump Water Management |
No input details available.
No output details available.
No specifications details available.
Related Products
×
Hello!
Click one of our representatives below to chat on WhatsApp or send us an email to admin@vbtron.com
×